BN - Web UI Interfaces

Click Interfaces on the navigation pane to open the network interface configuration screen. The top box provides a quick way to switch between different modes on each network interface. Use the toggle buttons to enable or disable interface options.

Note

In-Band management, Out-of-Band (OOB) management, and the Cloud Internal interface (TCS) cannot be disabled.

If any changes have been made, click Save Config. New configuration settings are not used until Apply is clicked or the system is rebooted.

b-1.jpg

Figure 128: Network Interface Configuration (Interface Summary)

The bottom box shows network statistics for each interface. Use the drop-down box to switch between network interfaces.

b-2.jpg

Figure 129: Network Interface Configuration (Statistics)

Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Article is closed for comments.