BN - LED Light Status

The LED lights on the BN and RN can be used to determine the current state of the device. Slightly different behavior exists between the different devices.

Normal Operation

The following states indicate normal operations.

State

Power

Link

Status

Power off

Off

Off

Off

Startup1

Red (blinking)

Off

Off

Initial boot loader

Amber (solid)

Amber (solid)

Amber (solid)

Linux booting

Green (blinking)

Off

Off

Linux booted

Green (solid)

Any color/state

Off

Radio not initialized

Green (solid)

Off

Off

Radio initializing

Green (solid)

Amber (blinking)

Green (solid)

Waiting for GPS lock/spectrum allocation

Green (solid)

Red (blinking)

Green (solid)

Radio calibration

Green (solid)

Amber (solid)

Green (solid)

Operational (no RNs connected)

Green (solid)

Green (blinking)

Green (solid)

Operational (RNs connected)

Green (solid)

Green (solid)

Green (solid)

Radio muted (no link)

Green (solid)

Red (solid)

Any color/state

Factory reset

Amber (blinking)

Amber (blinking)

Amber (blinking)

Note: The BN’s reset button should not be used.

Faults

The following states indicate possible faults.

State

Power

Link

Status

Hardware fault

Red (blinking or solid)

Off

Off

Boot failure

Amber (solid)

Off

Off

Runtime error (warning)2

Green (solid)

Any color/state

Amber (blinking)

Runtime error (critical)3

Green (solid)

Any color/state

Red (blinking)

1 –May indicate a hardware failure if the BN stays in this state for more than approximately 1 minute.

2 – Indicates one or more of the following:

  • Alarm raised

  • Lower modulation

  • Packet errors above threshold

  • GPS lock loss

  • Upgrade failed

3 – Indicates one or more of the following:

  • Link down

  • Watchdog error

  • Hardware failure

Data Links LED

The following states indicate ethernet status on the data ports:

State

Data 1

Data 2

Data 3

100 Mbps Link Up

Yellow (solid)

Yellow (solid)

Yellow (solid)

100 Mbps Link Activity

Yellow + Green (blinking)

Yellow + Green (blinking)

Yellow + Green (blinking)

1 Gbps Link Up

Green (solid)

Green (solid)

Green (solid)

1 Gbps Link Activity

Green (blinking)

Green (blinking)

Green (blinking)

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.